HS Chapter 72
Iron and steel
Updated May 2026 — Source: Receita Federal (TEC/TIPI), CAMEX, MDIC
212
NCM codes
167
HS headings
0%–12.6%
Import duty range
0
Ex-Tarifário NCMs
Exporter insight
Iron and steel — 212 NCM codes. Brazil has a major steel industry (Gerdau, CSN, Usiminas). Anti-dumping duties are common on steel imports. Check for AD orders before quoting.
EU-Mercosur impact
Mixed — some products liberalized, others subject to safeguards. Anti-dumping remains independent of the FTA.
Common products in this chapter
Steel platesSteel coilsStainless steelSteel bars
All NCM codes in Chapter 72
212 codes across 167 headings7201.10Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7201.10.00 | - Ferro fundido bruto não ligado, que contenha, em peso, 0,5 % ou menos de fósforo | 3.6% | 3.25% | — | Calculate → |
7201.20Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7201.20.00 | - Ferro fundido bruto não ligado, que contenha, em peso, mais de 0,5 % de fósforo | 3.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7201.50.00 | - Ligas de ferro fundido bruto; ferro spiegel (especular) | 3.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.11.00 | -- Que contenha, em peso, mais de 2 % de carbono | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.19.00 | -- Outra | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.21.00 | -- Que contenha, em peso, mais de 55 % de silício | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.29.00 | -- Outra | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.30.00 | - Ferrossiliciomanganês | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.41.00 | -- Que contenha, em peso, mais de 4 % de carbono | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.49.00 | -- Outra | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.50.00 | - Ferrossiliciocromo | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.60.00 | - Ferroníquel | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.70.00 | - Ferromolibdênio | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.80.00 | - Ferrotungstênio (ferrovolfrâmio) e ferrossiliciotungstênio (ferrossiliciovolfrâmio) | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.91.00 | -- Ferrotitânio e ferrossiliciotitânio | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.92.00 | -- Ferrovanádio | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.93.00 | -- Ferronióbio (ferrocolômbio) | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7202.99.10 | Ferrofósforo | 5.4% | 3.25% | — | Calculate → |
| 7202.99.90 | Outras | 5.4% | 3.25% | — | Calculate → |
7203.10Ferrous products; obtained by direct reduction of iron ore, in lumps, pellets or similar forms
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7203.10.00 | - Produtos ferrosos obtidos por redução direta dos minérios de ferro | 0% | 3.25% | — | Calculate → |
7203.90Ferrous products; spongy ferrous products and iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7203.90.00 | - Outros | 0% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.10.00 | - Desperdícios e resíduos, e sucata, de ferro fundido | 0% | NT | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.21.00 | -- De aço inoxidável | 0% | NT | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.29.00 | -- Outros | 0% | NT | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.30.00 | - Desperdícios e resíduos, e sucata, de ferro ou aço, estanhados | 0% | NT | — | Calculate → |
7204.41Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.41.00 | -- Resíduos do torno e da fresa, aparas, lascas (meulures), pó de serra, limalhas e desperdícios da estampagem ou do corte, mesmo em fardos | 0% | NT | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.49.00 | -- Outros | 0% | NT | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7204.50.00 | - Desperdícios e resíduos, em lingotes | 0% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7205.10.00 | - Granalhas | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7205.21.00 | -- De ligas de aço | 0% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7205.29.10 | De ferro esponjoso, com um teor de ferro igual ou superior a 98 %, em peso | 0% | 3.25% | — | Calculate → |
| 7205.29.20 | De ferro revestido com resina termoplástica, com um teor de ferro igual ou superior a 98 %, em peso | 0% | 3.25% | — | Calculate → |
| 7205.29.90 | Outros | 5.4% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7206.10.00 | - Lingotes | 5.4% | 3.25% | — | Calculate → |
7206.90Iron or non-alloy steel; primary forms (excluding ingots and iron of heading no. 7203)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7206.90.00 | - Outros | 5.4% | 3.25% | — | Calculate → |
7207.11Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7207.11.10 | Billets | 7.2% | 3.25% | — | Calculate → |
| 7207.11.90 | Outros | 7.2% | 3.25% | — | Calculate → |
7207.12Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7207.12.00 | -- Outros, de seção transversal retangular | 7.2% | 3.25% | — | Calculate → |
7207.19Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7207.19.00 | -- Outros | 7.2% | 3.25% | — | Calculate → |
7207.20Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7207.20.00 | - Que contenham, em peso, 0,25 % ou mais de carbono | 7.2% | 3.25% | — | Calculate → |
7208.10Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.10.00 | - Em rolos, simplesmente laminados a quente, apresentando motivos em relevo | 10.8% | 3.25% | — | Calculate → |
7208.25Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.25.00 | -- De espessura igual ou superior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
7208.26Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.26.10 | Com um limite mínimo de elasticidade de 355 MPa | 9% | 3.25% | — | Calculate → |
| 7208.26.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7208.27Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.27.10 | Com um limite mínimo de elasticidade de 275 MPa | 9% | 3.25% | — | Calculate → |
| 7208.27.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7208.36Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.36.10 | Com um limite mínimo de elasticidade de 355 MPa | 9% | 3.25% | — | Calculate → |
| 7208.36.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7208.37Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.37.00 | -- De espessura igual ou superior a 4,75 mm, mas não superior a 10 mm | 10.8% | 3.25% | — | Calculate → |
7208.38Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.38.10 | Com um limite mínimo de elasticidade de 355 MPa | 9% | 3.25% | — | Calculate → |
| 7208.38.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7208.39Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.39.10 | Com um limite mínimo de elasticidade de 275 MPa | 9% | 3.25% | — | Calculate → |
| 7208.39.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7208.40Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.40.00 | - Não enrolados, simplesmente laminados a quente, apresentando motivos em relevo | 10.8% | 3.25% | — | Calculate → |
7208.51Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.51.00 | -- De espessura superior a 10 mm | 10.8% | 3.25% | — | Calculate → |
7208.52Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.52.00 | -- De espessura igual ou superior a 4,75 mm, mas não superior a 10 mm | 10.8% | 3.25% | — | Calculate → |
7208.53Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.53.00 | -- De espessura igual ou superior a 3 mm, mas inferior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
7208.54Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.54.00 | -- De espessura inferior a 3 mm | 10.8% | 3.25% | — | Calculate → |
7208.90Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7208.90.00 | - Outros | 10.8% | 3.25% | — | Calculate → |
7209.15Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.15.00 | -- De espessura igual ou superior a 3 mm | 10.8% | 3.25% | — | Calculate → |
7209.16Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.16.00 | -- De espessura superior a 1 mm, mas inferior a 3 mm | 10.8% | 3.25% | — | Calculate → |
7209.17Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.17.00 | -- De espessura igual ou superior a 0,5 mm, mas não superior a 1 mm | 10.8% | 3.25% | — | Calculate → |
7209.18Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.18.00 | -- De espessura inferior a 0,5 mm | 10.8% | 3.25% | — | Calculate → |
7209.25Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.25.00 | -- De espessura igual ou superior a 3 mm | 10.8% | 3.25% | — | Calculate → |
7209.26Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.26.00 | -- De espessura superior a 1 mm, mas inferior a 3 mm | 10.8% | 3.25% | — | Calculate → |
7209.27Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.27.00 | -- De espessura igual ou superior a 0,5 mm, mas não superior a 1 mm | 10.8% | 3.25% | — | Calculate → |
7209.28Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.28.00 | -- De espessura inferior a 0,5 mm | 10.8% | 3.25% | — | Calculate → |
7209.90Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7209.90.00 | - Outros | 10.8% | 3.25% | — | Calculate → |
7210.11Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.11.00 | -- De espessura igual ou superior a 0,5 mm | 10.8% | 3.25% | — | Calculate → |
7210.12Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.12.00 | -- De espessura inferior a 0,5 mm | 10.8% | 3.25% | — | Calculate → |
7210.20Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.20.00 | - Revestidos de chumbo, incluindo os revestidos de uma liga de chumboestanho | 10.8% | 3.25% | — | Calculate → |
7210.30Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.30.10 | De espessura inferior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
| 7210.30.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7210.41Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.41.10 | De espessura inferior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
| 7210.41.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7210.49Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.49.10 | De espessura inferior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
| 7210.49.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7210.50Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.50.00 | - Revestidos de óxidos de cromo ou de cromo e óxidos de cromo | 10.8% | 3.25% | — | Calculate → |
7210.61Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.61.00 | -- Revestidos de ligas de aluminiozinco | 10.8% | 3.25% | — | Calculate → |
7210.69Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.69.11 | De peso igual ou superior a 120 g/m2 e com conteúdo de silício igual ou superior a 5 %, mas inferior ou igual a 11 %, em peso | 0% | 3.25% | — | Calculate → |
| 7210.69.19 | Outros | 10.8% | 3.25% | — | Calculate → |
| 7210.69.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7210.70Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.70.10 | Pintados ou envernizados | 10.8% | 3.25% | — | Calculate → |
| 7210.70.20 | Revestidos de plástico | 10.8% | 3.25% | — | Calculate → |
7210.90Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7210.90.00 | - Outros | 10.8% | 3.25% | — | Calculate → |
7211.13Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.13.00 | -- Laminados nas quatro faces ou em caixa fechada, de largura superior a 150 mm e de espessura igual ou superior a 4 mm, não enrolados e não apresentando motivos em relevo | 10.8% | 3.25% | — | Calculate → |
7211.14Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.14.00 | -- Outros, de espessura igual ou superior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
7211.19Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.19.00 | -- Outros | 10.8% | 3.25% | — | Calculate → |
7211.23Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.23.00 | -- Que contenham, em peso, menos de 0,25 % de carbono | 10.8% | 3.25% | — | Calculate → |
7211.29Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.29.10 | Com um teor de carbono igual ou superior a 0,25 %, mas inferior a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
| 7211.29.20 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
7211.90Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7211.90.10 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
| 7211.90.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7212.10Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.10.00 | - Estanhados | 10.8% | 3.25% | — | Calculate → |
7212.20Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.20.10 | De espessura inferior a 4,75 mm | 10.8% | 3.25% | — | Calculate → |
| 7212.20.90 | Outros | 10.8% | 3.25% | — | Calculate → |
7212.30Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.30.00 | - Galvanizados por outro processo | 10.8% | 3.25% | — | Calculate → |
7212.40Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.40.10 | Pintados ou envernizados | 10.8% | 3.25% | — | Calculate → |
| 7212.40.21 | Com uma camada intermediária de liga cobre-estanho ou cobre-estanho-chumbo, aplicada por sinterização | 0% | 3.25% | — | Calculate → |
| 7212.40.29 | Outros | 10.8% | 3.25% | — | Calculate → |
7212.50Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.50.10 | Com uma camada de liga cobre-estanho ou cobre-estanho-chumbo, aplicada por sinterização, inclusive com revestimento misto metal-plástico ou metal-plástico-fibra de carbono | 0% | 3.25% | — | Calculate → |
| 7212.50.90 | Outros | 10.8% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7212.60.00 | - Folheados ou chapeados | 10.8% | 3.25% | — | Calculate → |
7213.10Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7213.10.00 | - Dentados, com nervuras, sulcos (entalhes) ou relevos, obtidos durante a laminagem | 10.8% | 0% | — | Calculate → |
7213.20Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7213.20.00 | - Outros, de aço para tornear | 10.8% | 0% | — | Calculate → |
7213.91Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7213.91.10 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 12% | 0% | — | Calculate → |
| 7213.91.90 | Outros | 10.8% | 0% | — | Calculate → |
7213.99Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7213.99.10 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 10.8% | 0% | — | Calculate → |
| 7213.99.90 | Outros | 10.8% | 0% | — | Calculate → |
7214.10Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7214.10.10 | Com um teor de carbono inferior ou igual a 0,6 %, em peso | 10.8% | 0% | — | Calculate → |
| 7214.10.90 | Outras | 10.8% | 0% | — | Calculate → |
7214.20Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7214.20.00 | - Dentadas, com nervuras, sulcos (entalhes) ou relevos, obtidos durante a laminagem, ou torcidas após laminagem | 12% | 0% | — | Calculate → |
7214.30Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7214.30.00 | - Outras, de aço para tornear | 10.8% | 0% | — | Calculate → |
7214.91Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7214.91.00 | -- De seção transversal retangular | 10.8% | 0% | — | Calculate → |
7214.99Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7214.99.10 | De seção circular | 10.8% | 0% | — | Calculate → |
| 7214.99.90 | Outras | 10.8% | 0% | — | Calculate → |
7215.10Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7215.10.00 | - De aço para tornear, simplesmente obtidas ou completamente acabadas a frio | 10.8% | 3.25% | — | Calculate → |
7215.50Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7215.50.00 | - Outras, simplesmente obtidas ou completamente acabadas a frio | 10.8% | 3.25% | — | Calculate → |
7215.90Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7215.90.10 | Com um teor de carbono inferior ou igual a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
| 7215.90.90 | Outras | 10.8% | 3.25% | — | Calculate → |
7216.10Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.10.00 | - Perfis em U, I ou H, simplesmente laminados, estirados ou extrudados, a quente, de altura inferior a 80 mm | 10.8% | 0% | — | Calculate → |
7216.21Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.21.00 | -- Perfis em L | 10.8% | 0% | — | Calculate → |
7216.22Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.22.00 | -- Perfis em T | 10.8% | 0% | — | Calculate → |
7216.31Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.31.00 | -- Perfis em U | 10.8% | 0% | — | Calculate → |
7216.32Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.32.00 | -- Perfis em I | 10.8% | 0% | — | Calculate → |
7216.33Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.33.00 | -- Perfis em H | 10.8% | 0% | — | Calculate → |
7216.40Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.40.10 | De altura inferior ou igual a 200 mm | 10.8% | 0% | — | Calculate → |
| 7216.40.90 | Outros | 10.8% | 0% | — | Calculate → |
7216.50Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.50.00 | - Outros perfis, simplesmente laminados, estirados ou extrudados, a quente | 10.8% | 0% | — | Calculate → |
7216.61Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.61.10 | De altura inferior a 80 mm | 10.8% | 0% | — | Calculate → |
| 7216.61.90 | Outros | 10.8% | 0% | — | Calculate → |
7216.69Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.69.10 | De altura inferior a 80 mm | 10.8% | 0% | — | Calculate → |
| 7216.69.90 | Outros | 10.8% | 0% | — | Calculate → |
7216.91Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.91.00 | -- Obtidos ou acabados a frio a partir de produtos laminados planos | 10.8% | 0% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7216.99.00 | -- Outros | 10.8% | 0% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7217.10.11 | Com um teor, em peso, de fósforo inferior a 0,035 % e de enxofre inferior a 0,035 %, temperado e revenido, flecha máxima sem carga de 1 cm em 1 m, resistência à tração igual ou superior a 1.960 MPa e cuja maior dimensão da seção transversal seja inferior ou igual a 2,25 mm | 0% | 3.25% | — | Calculate → |
| 7217.10.19 | Outros | 10.8% | 3.25% | — | Calculate → |
| 7217.10.90 | Outros | 10.8% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7217.20.10 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
| 7217.20.90 | Outros | 10.8% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7217.30.10 | Com um teor de carbono igual ou superior a 0,6 %, em peso | 10.8% | 3.25% | — | Calculate → |
| 7217.30.90 | Outros | 10.8% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7217.90.00 | - Outros | 10.8% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7218.10.00 | - Lingotes e outras formas primárias | 7.2% | 3.25% | — | Calculate → |
7218.91Steel, stainless; semi-finished products, of rectangular (other than square) cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7218.91.00 | -- De seção transversal retangular | 7.2% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7218.99.00 | -- Outros | 7.2% | 3.25% | — | Calculate → |
7219.11Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.11.00 | -- De espessura superior a 10 mm | 12.6% | 3.25% | — | Calculate → |
7219.12Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.12.00 | -- De espessura igual ou superior a 4,75 mm, mas não superior a 10 mm | 12.6% | 3.25% | — | Calculate → |
7219.13Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.13.00 | -- De espessura igual ou superior a 3 mm, mas inferior a 4,75 mm | 12.6% | 3.25% | — | Calculate → |
7219.14Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.14.00 | -- De espessura inferior a 3 mm | 12.6% | 3.25% | — | Calculate → |
7219.21Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.21.00 | -- De espessura superior a 10 mm | 12.6% | 3.25% | — | Calculate → |
7219.22Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.22.00 | -- De espessura igual ou superior a 4,75 mm, mas não superior a 10 mm | 12.6% | 3.25% | — | Calculate → |
7219.23Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.23.00 | -- De espessura igual ou superior a 3 mm, mas inferior a 4,75 mm | 12.6% | 3.25% | — | Calculate → |
7219.24Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.24.00 | -- De espessura inferior a 3 mm | 12.6% | 3.25% | — | Calculate → |
7219.31Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.31.00 | -- De espessura igual ou superior a 4,75 mm | 12.6% | 3.25% | — | Calculate → |
7219.32Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.32.00 | -- De espessura igual ou superior a 3 mm, mas inferior a 4,75 mm | 12.6% | 3.25% | — | Calculate → |
7219.33Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.33.00 | -- De espessura superior a 1 mm, mas inferior a 3 mm | 12.6% | 3.25% | — | Calculate → |
7219.34Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.34.00 | -- De espessura igual ou superior a 0,5 mm, mas não superior a 1 mm | 12.6% | 3.25% | — | Calculate → |
7219.35Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.35.00 | -- De espessura inferior a 0,5 mm | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7219.90.10 | De espessura inferior a 4,75 mm e dureza igual ou superior a 42 HRC | 0% | 3.25% | — | Calculate → |
| 7219.90.90 | Outros | 12.6% | 3.25% | — | Calculate → |
7220.11Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7220.11.00 | -- De espessura igual ou superior a 4,75 mm | 12.6% | 3.25% | — | Calculate → |
7220.12Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7220.12.10 | De espessura inferior ou igual a 1,5 mm | 12.6% | 3.25% | — | Calculate → |
| 7220.12.20 | De espessura superior a 1,5 mm, mas não superior a 3 mm | 12.6% | 3.25% | — | Calculate → |
| 7220.12.90 | Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7220.20.10 | De largura inferior ou igual a 23 mm e espessura inferior ou igual a 0,1 mm | 0% | 3.25% | — | Calculate → |
| 7220.20.90 | Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7220.90.00 | - Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7221.00.00 | Fio-máquina de aço inoxidável. | 12.6% | 3.25% | — | Calculate → |
7222.11Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7222.11.00 | -- De seção circular | 12.6% | 3.25% | — | Calculate → |
7222.19Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7222.19.10 | De seção transversal retangular | 12.6% | 3.25% | — | Calculate → |
| 7222.19.90 | Outras | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7222.20.00 | - Barras simplesmente obtidas ou completamente acabadas a frio | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7222.30.00 | - Outras barras | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7222.40.10 | De altura igual ou superior a 80 mm | 0% | 3.25% | — | Calculate → |
| 7222.40.90 | Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7223.00.00 | Fios de aço inoxidável. | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7224.10.00 | - Lingotes e outras formas primárias | 7.2% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7224.90.00 | - Outros | 7.2% | 3.25% | — | Calculate → |
7225.11Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.11.00 | -- De grãos orientados | 12.6% | 3.25% | — | Calculate → |
7225.19Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.19.00 | -- Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.30.00 | - Outros, simplesmente laminados a quente, em rolos | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.40.10 | De aço, segundo normas AISI D2, D3 ou D6, de espessura inferior ou igual a 7 mm | 0% | 3.25% | — | Calculate → |
| 7225.40.20 | De aços de corte rápido | 0% | 3.25% | — | Calculate → |
| 7225.40.90 | Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.50.10 | De aços de corte rápido | 0% | 3.25% | — | Calculate → |
| 7225.50.90 | Outros | 12.6% | 3.25% | — | Calculate → |
7225.91Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.91.00 | -- Galvanizados eletroliticamente | 12.6% | 3.25% | — | Calculate → |
7225.92Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.92.00 | -- Galvanizados por outro processo | 12.6% | 3.25% | — | Calculate → |
7225.99Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc)
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7225.99.10 | De aços de corte rápido | 0% | 3.25% | — | Calculate → |
| 7225.99.90 | Outros | 12.6% | 3.25% | — | Calculate → |
7226.11Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, grain-oriented
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.11.00 | -- De grãos orientados | 12.6% | 3.25% | — | Calculate → |
7226.19Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, other than grain-oriented
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.19.00 | -- Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.20.10 | De espessura igual ou superior a 1 mm, mas não superior a 4 mm | 0% | 3.25% | — | Calculate → |
| 7226.20.90 | Outros | 12.6% | 3.25% | — | Calculate → |
7226.91Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), hot-rolled
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.91.00 | -- Simplesmente laminados a quente | 12.6% | 3.25% | — | Calculate → |
7226.92Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), cold-rolled
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.92.00 | -- Simplesmente laminados a frio | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7226.99.00 | -- Outros | 12.6% | 3.25% | — | Calculate → |
7227.10Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of high speed steel
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7227.10.00 | - De aço de corte rápido | 12.6% | 3.25% | — | Calculate → |
7227.20Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7227.20.00 | - De aço siliciomanganês | 12.6% | 3.25% | — | Calculate → |
7227.90Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7227
Details →| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7227.90.00 | - Outros | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.10.10 | Simplesmente laminadas, estiradas ou extrudadas, a quente | 12.6% | 3.25% | — | Calculate → |
| 7228.10.90 | Outras | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.20.00 | - Barras de aço siliciomanganês | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.30.00 | - Outras barras, simplesmente laminadas, estiradas ou extrudadas, a quente | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.40.00 | - Outras barras, simplesmente forjadas | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.50.00 | - Outras barras, simplesmente obtidas ou completamente acabadas a frio | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.60.00 | - Outras barras | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.70.00 | - Perfis | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7228.80.00 | - Barras ocas para perfuração | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7229.20.00 | - De aço siliciomanganês | 12.6% | 3.25% | — | Calculate → |
| NCM | Description (PT) | II | IPI | Ex-Tarif. | |
|---|---|---|---|---|---|
| 7229.90.00 | - Outros | 12.6% | 3.25% | — | Calculate → |
Ready to calculate your import costs?
Enter your product details and get a full tax breakdown including all 7 Brazilian import taxes.